Loose cables

Mehr
05 Aug 2015 17:50 - 05 Aug 2015 17:53 #2 von BIF
Loose cables wurde erstellt von BIF
Connection between different devices is not stable and accidental loose cables cause interruption of the process. In that case it is necessary BIF (mainly Andre` or Paul) assistance.
Letzte Änderung: 05 Aug 2015 17:53 von BIF.

Bitte Anmelden um der Konversation beizutreten.

Mehr
12 Aug 2015 17:28 #23 von Gianluca Mingoia
Gianluca Mingoia antwortete auf Loose cables
The problems with the cables is not new and we started to consider that in the BIF since a couple of months even because of your signals. Renè Müller together with Andrè Schüppen are considering this problem. A full new wiring will be designed and realized at both Scanners starting in September.

Bitte Anmelden um der Konversation beizutreten.

  • René
18 Sep 2015 11:01 - 18 Sep 2015 11:02 #42 von René
René antwortete auf Loose cables
The Presentation and Eye-Tracker will get new Hardware soon.
However, the scanners are booked up until the 6th October.
Therefor Paul is preparing the new Hardware.
The intention is to update the software and hardware to the same level as the scanner in the basement of the University Hospital.

On the 6th October we will change the complete Hardware and we want to solve the problem with the cables in the background of all devices.

At the moment we are not ready to solve the cable problems infront of the three devices: Trigger-, PC- and LWLmodul. First of all René has to develop the new stimulation equipment.
Here you get more information about the new development of the stimulation equipment.
Letzte Änderung: 18 Sep 2015 11:02 von René .

Bitte Anmelden um der Konversation beizutreten.

Mehr
19 Okt 2015 09:38 #60 von André Schüppen
André Schüppen antwortete auf Loose cables
We replaced and tested the new presentation-pc and eye-tracker-pc and we also fixed the loose cables. During that we had some problems to solve, e.g. one switch and an power adapter was broken and must be replaced and also the graphic adapter was not compatible with the combination of switches and splitter. Now the system seems to run stable and is faster and more quiet than the old one. Nevertheless we were not able to test everything, so please contact us (89758 or 89150) when there are still some questions or problems.

To switch on the BOLD-screen behind the magnet for the presentation-pc a special treatment is needed, this will be explained on a sheet at the Presentation-PC. Even though this is a task that must be done rarely we are still working on that to find an easier solution.

Bitte Anmelden um der Konversation beizutreten.

Ladezeit der Seite: 0.142 Sekunden
Powered by Kunena Forum